Blackline Performance Parts Thread

[Blackline]

We also do quite a bit of performance modification here at Blackline including exhausts, intercoolers, intakes, Celtic Tuning software and much more.

I'll do my best to keep this updated with anything cool coming through our doors.

Here's a few examples of what we have done recently...

Cat back resonated Milltek exhaust on a Nogaro blue RS4.

MK8 Golf GTI Clubsport with a cat back Remus exhaust and black chrome tips.

RSQ8 with Milltek decat downpipes and Celtic Tuning software pushing out over 700hp now!

This Audi S5 got a Milltek decat downpipe, Forge intercooler upgrade, CTS Turbo intake, Eibach springs, spacers and Celtic Tuning software. Now with over 400hp and a great sound track!

We also cater for the TDI lovers with a lot of Darkside Developments downpipes and exhaust upgrades too. As always, we use Celtic Tuning for the software to suit DPF delete downpipes and release a few extra horsepower aswell.

Thanks,

Aaron

 

[Blackline]

We supplied and fitted a CTS Turbo intake to a really nice M140i yesterday...

Before

After.

Nice piece of kit and sounded well.

Thanks for looking,

Aaron

 

[Blackline]

We had this Fiesta ST in for a Forge intake and recirculating dump valve yesterday.

Supplied and fitted by us.

 

[da.murf]

random one, but have you experience re-mapping a 350z?

 

[Blackline]

random one, but have you experience re-mapping a 350z?

We haven't re-mapped one of those yet but Celtic Tuning do offer software for it so it shouldn't be a problem.

 

[da.murf]

We haven't re-mapped one of those yet but Celtic Tuning do offer software for it so it shouldn't be a problem.

That’s great to know thanks, I was only aware of UpRev software on them.

Could you pm me a quote on a cost and options?

Thanks

 

[Chris Mac]

Anything to make a Mk8 GTi Clubsport sound slightly better?

 

[Blackline]

Anything to make a Mk8 GTi Clubsport sound slightly better?

We supplied and fitted this Remus exhaust to Erics Clubsport a few months back. Sounded fantastic.

 

[Blackline]

Not a performance part this one but we fitted some added security to this brand new Fiesta ST in the form of a ghost immobiliser.

Very cool piece of kit that works on a specific input of buttons or controls to allow you drive the car. Imagine it's like a PIN number you have to enter before you drive off.

 

[Boydie]

Some S-Line side skirts on that A3 would do well

@Blackline can you offer any solutions for apple car play for MIB1 units in the 2014-16 A3/S3?

 

[Blackline]

Some S-Line side skirts on that A3 would do well

@Blackline can you offer any solutions for apple car play for MIB1 units in the 2014-16 A3/S3?

As far as I'm aware it's dealer activation only on those.

 

[Blackline]

Well this week we had the Juke Nismo RS back in for an Airtec intercooler upgrade and some Celtic Tuning software to suit...

Massive increase in surface area to keep the charge temps down and a well designed piece of kit. Going really well now.

We also had a returning customer back in for brakes all round on his S5.

Here it is waiting for collection and sporting the Maxton Design kit we supplied for it too.

Cheers,

Aaron

 

[Boydie]

Juke is class - what are the power figures after mapping?

 

[Blackline]

Celtic Tuning quote 235hp and 215lb/ft of torque on a standard car with Stage 1 but with the intercooler on this one it should be more than that again. It certainly feels it.

 

[Dave..]

@Blackline
How much is the Celtic Tuning for a 2015 VW Caddy 1.6tdi? Thanks.

 

[mx5 turbo]

@Blackline can you send me the price for stage 1 remap please

 

[Blackline]

No big updates here at the minute although we have had a few cool things through the doors recently like this big silly Soarer...

...with over 700hp on tap!!!

Built by the guys at Unlimited Super it's a 1.5JZ with a huge Holset HTX40 strapped to the side of it along with a whole host of other supporting mods.

Ryan brought it down to us to perform a full 4 wheel laser alignment on it and we have to say it was a pleasure having something this crazy in the workshop.

We also had an RS3 in for Stage 1 software bringing it to 410hp, a Milltek Cat back system on a Golf R Estate and an E46 M3 track car in for alignment.

 

[Blackline]

Couple of cool things through the doors last week...

...first up was this EK Civic in for a track spec alignment...

...although it says 1.4i on the back it actually had a frankenstein B20 engine upfront. Made with the 2L block of an old CRV and the B18 head off a DC2 Integra it produces around 200hp and decent torque for a VTEC.

Next we had forum member @B6GUE in with his very clean Fiesta ST for a Milltek non-res cat-back system.

The car already had a nicely fabricated system on it but it was too loud with no silencers present in the system at all. This Milltek system has a decent sized back box on it so still allows a nice note but means it isn't intrusive or annoying on long journeys.

And finally we've just had some special coilovers arrive...check back shortly to see what they're going into.

Cheers,

Aaron

 

[Blackline]

You might have seen our most recent post on social media but for those of you who haven't....

We were entrusted with the task of fitting a Brooke Race Exhausts Iconel H-Pipe exhaust system to this magnificent Huracan Performante.

Bit of a stripping session required to do the job but well worth it for the noise and a decent weight saving too!

Great to have something as special as this through our doors.

 

[Boydie]

Bet is sounds shiite.......

This is useless without video

 

[Blackline]

Bet is sounds shiite.......

This is useless without video

Apologies for the lack of video. Have a wee look at Brooke Race Exhausts on Instagram though, they put up plenty of videos of the different supercars they do and they all sound amazing!
This week we've had a couple of hot hatches through our doors for some nice but simple mods.

First up was this M140i for a Remus axle back exhaust, Motec Intake and Forge Motorsport boost pipes.

And we also fitted a Bilstein shock and Eibach spring kit while we were at it...

Next we had a very clean MK5 GTI jap import in for a Milltek non-res cat-back exhaust, Revo intake and Powerflex anti-lift kit.

Both cars now sounding, performing and handling much better with these simple upgrades.

 

[Boydie]

The anti lift kits are awesome - had a whiteline kit in my 8P S3 and made such a difference

 

[Blackline]

Supplied and fitted a set of OZ Racing Ultraleggera wheels to this bagged Audi S3 last week.

We also sourced some center lock style caps to give it that motorsport vibe, although we are currently waiting on smaller OZ caps arriving to complete them.

Having previously been with us for a full turbo back Milltek exhaust, Forge Motorsport intercooler, boost pipe kit and Celtic Tuning software this car is currently pushing out around 380hp so it definitely has the performance to match the looks.

In this week we had a new shape M4.

We've previously fitted lowering springs, spacers and a Milltek cat-back system to this car when it was fresh out of the showroom but the customer was back to get the OPF delete pipes fitted to make it even louder again.

I'm actually starting to come round to the style of these a bit now but they definitely need lowered and spacers at a minimum.

Let me know what you guys think.

Cheers,

Aaron

 

[Blackline]

Here's a small selection of what we've had in recently.

@Chris tii lovely MK5 Golf GTI for an upgraded clutch and suspension set up.

This Mini Cooper S for a Milltek Sports Cat downpipe and a Celtic Tuning Remap.

And this cool Nismo Juke back for a Forge Motorsport dump valve.

 

[Lyons]

That white GTi is so fresh looking!