Dastek Info

Discussion in 'AI Autosport' started by mattman, Nov 26, 2011.

  1. mattman RMS Regular

    Offline
    Member Since:
    Aug 11, 2009
    Location:
    carrickfergus
    Drives:
    civic ek
    Was just wondering but can dastek raise and the lower the vtec limits and raise the redline ?
    mattman, Nov 26, 2011
    #1

  2. josh897 RMS Regular

    Offline
    Member Since:
    Jul 2, 2008
    Location:
    Bangor
    Drives:
    EP civic
    From what i remember it may be pretty much one of the only features it doesnt have, worst case scenario you can run it alongside a controller
    josh897, Nov 26, 2011
    #2

  3. Bronk RMS Regular

    Offline
    Member Since:
    Dec 2, 2002
    Location:
    Here, There and Every where
    It can lower vtec cross over , mine was dropped to 5800rpm with my dastek in my old ep3
    Bronk, Nov 26, 2011
    #3

  4. mattman RMS Regular

    Offline
    Member Since:
    Aug 11, 2009
    Location:
    carrickfergus
    Drives:
    civic ek
    so I dont need a vtec controller.Am more or less copying your engine work bronk :)
    mattman, Nov 27, 2011
    #4

  5. Bronk RMS Regular

    Offline
    Member Since:
    Dec 2, 2002
    Location:
    Here, There and Every where
    good job :)

    jonny @ ai autosport will keep you right :)

    gruppe m or tegiaw replica gruppe m is a MUST :)
    Bronk, Nov 27, 2011
    #5

  6. mattman RMS Regular

    Offline
    Member Since:
    Aug 11, 2009
    Location:
    carrickfergus
    Drives:
    civic ek
    am going for an aem intake but am gonna try something better and build a cold box with a cold air intake into it if that doesn't work Tegwia copy it is :)
    mattman, Nov 28, 2011
    #6

  7. bluntcap RMS Regular

    Offline
    Member Since:
    Oct 19, 2008
    Location:
    A Land Far Far Away
    Drives:
    Civic Type R
    bluntcap, Nov 28, 2011
    #7

  8. mattman RMS Regular

    Offline
    Member Since:
    Aug 11, 2009
    Location:
    carrickfergus
    Drives:
    civic ek
    I already have an AEM so I see no reason not to try and make a cold box around the aem to take away heatsoak most kits eg AEM cai are just extensions really.Am just interested to try to be honest :)
    mattman, Nov 28, 2011
    #8

  9. AIRFORCE1 AI Autosport

    Offline
    Member Since:
    Jun 10, 2004
    Location:
    The Mighty 164
    Drives:
    164/580 Topline
    Yes it can drop Vtec but needs an extra little controller at 20 quid added into the wiring. It can't do rev limit on ep3 tho. It can on some cars but ep3 isn't one.
    Jonathan
    AIRFORCE1, Dec 24, 2011
    #9

  10. mattman RMS Regular

    Offline
    Member Since:
    Aug 11, 2009
    Location:
    carrickfergus
    Drives:
    civic ek
    thanks very much how much longer are you goanna be offering mapping for dastek as i have my chip just need get my manifold and stuff fitted and get this thing mapped :)
    mattman, Dec 25, 2011
    #10

  11. AIRFORCE1 AI Autosport

    Offline
    Member Since:
    Jun 10, 2004
    Location:
    The Mighty 164
    Drives:
    164/580 Topline
    I'll always be mapping them. Only difference no rollers will make is no power graphs. Will have absolutely NO effect on the power made.
    AIRFORCE1, Dec 25, 2011
    #11

  12. mattman RMS Regular

    Offline
    Member Since:
    Aug 11, 2009
    Location:
    carrickfergus
    Drives:
    civic ek
    When do the rollers go.Yeah thats fine just checking as i wanna get as much done before hand as i can :)
    mattman, Dec 25, 2011
    #12

Share This Page