Central locking packed in, Help Needed

Discussion in 'Technical and Mechanical' started by CR-6N, Mar 11, 2010.

  1. CR-6N RMS Regular

    Offline
    Member Since:
    Feb 10, 2009
    Whilst fitting a new set of components to my 6n a few weeks ago I have seemed to knock off the central locking.

    When I put the key in there is no usual whining noise from the pump but I'm not sure if it is a goner or not.

    I also busted. A connector that Leads from the door to the car, I have it connected back up and the window works but the central locking doesn't.

    As far as I'm aware it's an air pump system, it could be that Its just not sealing properly at that connection.

    I can't seem to get the parts anywhere and I don't want to start fiddling with the electrics in that connector.

    Anyone know where I could get it sorted? I could probably spend all day farting about trying to get it working but I'd probably end up breaking all sorts.

    Any ideas who could sort it out for me?
  2. cor5a_kid RMS Regular

    Offline
    Member Since:
    Jan 13, 2006
    Location:
    Craigavon
    Drives:
    Mk2 golf/6N Polo/Honda XL600R
    Chris was the pump working before cos it's known to fook up with no prior warning
  3. CR-6N RMS Regular

    Offline
    Member Since:
    Feb 10, 2009
    Aye Connor it was only when I took the connector off to run the cable through it that it stopped working lol

    The serrated seal on it that you need to remove with a c spanner has busted off so I think I may have an air leak but Im not sure if I got a new connector would I be confident swapping all the wiring over.

    Also strange thing happens. Sometimes at night I put my window down and I lose all my interior lights lol dash board etc.

    But if I turn the lights off then on they come on deadon. Just don't fancy losing all light on the way up to nutts corner some night.

Share This Page